This just in from the Petroleum Equipment Institute:
TULSA, Oklahoma, April 21, 2017/Petroleum Equipment Institute/ — The 2017 edition of PEI/RP100: Recommended Practices for Installation of Underground Liquid Storage Systems is available for purchase at www.pei.org/rp100.
The purchase price is $40 for PEI members and $95 for nonmembers.
“PEI is offering the petroleum and liquid handling equipment industry the latest update to this peer-reviewed technical document,” said Rick Long, general manager of PEI. “Of the two comprehensive installation codes of practice mentioned in the federal regulations on USTs and piping, only PEI/RP100 has been updated regularly during the past 30 years.”
The 2017 edition is the ninth revision of PEI/RP100 since it was published originally in 1986. This latest version replaces the 2011 edition.
After reviewing more than 30 public comments, the PEI Tank Installation Committee created the 2017 edition to be easier to read, clarified several items and included significant changes in recommendations. Of note in the 2017 edition:
- Vent restriction devices (ball float valves) no longer are an installation option.
- Appendix C provides new resources on corrosion in underground storage tanks (USTs) storing diesel and ethanol fuel blends.
- The 2017 edition lists double-walled spill buckets as an installation option to consider.
- Updates include procedures, measurements and time requirements for containment sump testing.
- The committee rewrote, reorganized and expanded the 2011 “Release Detection” chapter into a new “Leak Detection” chapter with practices for double-walled tanks and piping.
- The committee updated illustrations and captions from the 2011 edition and added graphics on suction pumping, piping layouts and flexible connectors.
PEI Tank Installation Committee members are: Leland M. Freemen, Petroleum Solutions Inc. (chairman); Blake Bammer, Jones & Frank; Carl E. Bayliss II, BC&C LLC; Joey Cheek, Guardian Fueling Technologies; Ryan Haerer, U.S. Environmental Protection Agency; Gina Jaimes, Sunoco LP; Michael Mizicko, Western Pump Inc.; David J. Piercey, JD2 Environmental Inc.; Peter Rollo, DNREC–Tank Management Branch; Greg Thomas, C.E. Thomas Co.; and Bill R White, D&H United Fueling Solutions Inc.
Kevin Henderson of Kevin Henderson Consulting served as the consultant.
Founded in 1951, PEI is composed of more than 1,600 companies engaged in manufacturing and distributing equipment used in the fuel and fluid handling industry. Members are located in 50 states and 81 countries. PEI, headquartered in Tulsa, Oklahoma, is the leading authority and source of information for the fuel and fluid handling equipment and services industry. For more information, visit www.pei.org.Contact: Kristen Wright, Managing Editor Phone: 918-640-6781 Email: firstname.lastname@example.org